I have searched everywhere for an exact answer, and am still not quite sure how to do it. Rackup File Config.ru Not Readable here. I am only 16 and this is my first vehicle. I have even looked in a Haynes repair manual, but it doesn't quite tell me what to do. I have a 1988 Jeep Cherokee. I notice that there are some clip-like things that come from inside the door, and there are also a lot of rivets that I don't know how to get off, and I wasn't sure if there were any secrets, easy ways or even screws and bolts that I haven't seen.

Window Crank Handle. Window Regulator Roller JEEP 1998 GRAND CHEROKEE 4.0L L6 Interior. Manual Window Regulator (Rebate/Promotion Available! Magix-samplitude-10pro Crack - Exclusive. ) Info. Don’t risk exposing the interior of your 2001 Jeep Cherokee to the elements. Our manual and power regulators are the remedy for malfunctioning windows.

Dell Windows 8 Uninstall Mcafee. Thanks for anything you can tell me. 1) Skin the inside of the door. Best to use a 'trim fork' to do this - most locals will have one (I think it's usually called an 'Automotive Trim Remover Tool. I'm not sure - the one I have is older than you.

If you're not sure what you're looking at, ask a counterman.) 2) Once you have the door skinned, check the bottom of the window glass. You should see a stud with a big flat nut on it running through the bottom of the glass - this is where the regulator attaches (power or electric.) 3a) If it's a power regulator, follow the cable assembly from the window to the motor, noting the attachment points. The regulator is probably rivetted, while the motor will be bolted to the door. 3b) From the manual regulators I've seen, they're all rivetted to the door (generally using three steel rivets - probably CRES. If they were aluminum, they'd have drilled out much more easily.) 4) Drill out the rivets using a 1/4' drill bit.