• Digital Multimeter 52-0052-2 INSTRUCTION MANUAL WARNING: READ AND UNDERSTAND THIS MANUAL BEFORE USING YOUR MULTIMETER. FAILURE TO UNDERSTAND AND COMPLY WITH WARNINGS AND OPERATING INSTRUCTIONS CAN RESULT IN SERIOUS OR FATAL INJURIES AND/OR PROPERTY DAMAGE. MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8. • 52-0052-2 HOLD Mastercraft / /½/ AC/ DC Data Hold Range Relative Backlight Hz/% NPN PNP AUTO POWER OFF AC/DC µ A AUTO-RANGING SELECTION AUTOMATIQUE V/½/F/ CAT II F US E D 100 0V DC 400m A 750V AC µ A/mA. • Before operating your multimeter, become familiar with each control.

A clear understanding of how your multimeter works will help to avoid mistakes and minimize measurement errors, instrument damage and the possibility of injury. SAFETY INSTRUCTIONS This meter has been designed for safe use, depending on UL61010-1, but must be operated with caution. Common Jack Plug-in connection for black (negative) test lead. V/ F / / /CAP Jack Ω Ω Ω Ω Plug-in connection for red (positive) test lead for all voltage, capacitance, frequency, resistance and continuity measurements, and diode checks. Data Hold & Backlight Button Use to hold a reading.

When this button is pressed, the data being displayed will be frozen on the LCD and 'HOLD' will appear. Changes in the input signals will not change the display. It can be used in all measurements modes.

Press the button again to release this function and the 'HOLD'. • Specifications: General Display: 3 3/4 digit LCD Maximum read: 4000 with automatic polarity display (no sign for positive polarity) Measuring method: A/D converter Sampling speed: 3 times/sec. Maximum common mode voltage: 500 V AC/DC Backlight for easy reading Auto shut-off switch: multimeter will be shut off after 30 minutes from last use Low battery indication: the battery symbol is displayed if battery voltage drops below operating voltage Operating environment: 5 35˚C, humidity.

Dear Sir: Thank you by your request, I will help you inmediately. How to measure FUSEAND CONTINUITY A digitalmultimeter is the ideal multimeter t use to check fuses. You can test afuse using either a digital volt-ohmmeter or an analog volt-ohmmeter. Thedigital multimeter uses a LCD to indicate the condition of the fuse under testwhile an analog meter uses a traditional meter movement to indicate the fusecondition. Difficulty: Easy Instructions Things You'll Need • Digital multimeter or analog multimeter 1. Usinga digital multimeter o 1 Connectthe test leads to the volt-ohmmeter.

Plug the black test leads into the blackjack marked 'Com' or 'Common' on the front of the meter.Plug the red test lead into the red jack marked 'Volts/Ohms' on thefront of the meter. Liscad Crack Keygen. O 2 Setthe meter's function switch to 'Ohms' and the range switch to the'R x 1' scale. If your digital multimeter is an auto ranging meter,you will not have a range switch. Instead, you'll have just a function switchbecause the meter will automatically select the right range for the quantitythat you are measuring.

Auto-ranging Digital Multimeter 52-0052-2 INSTRUCTION MANUAL. MASTERCRAFT CANADA TORONTO. Read on Scribd mobile: iPhone. Time: nick: berxuna mastercraft tester 052-0060-2 FREE! Download user guide, user manual, owner manual and instructions guide MASTERCRAFT - Read questions.

O 3 Turnoff the power and remove the fuse to be tested from the circuit. Never test afuse for continuity while it is still connected to the circuit that it is usedto protect. If the circuit still has voltage, the meter will be irreparablydamaged. If the fuse is still in the circuit when tested it is possible to geta false indication that the fuse is good if the meter gets a completed circuitthrough other circuit components. To be safe, always remove the fuse from thecircuit before testing it. O 4 Touchthe black test probe to one end of the fuse and the red test probe to the otherend of the fuse. It does not matter which probe you touch to which end becausefuses are not polarized.

You are checking to see if there is continuity throughthe fuse element. A reading of approximately 0.5 on a digital meter's LCDindicates a good fuse. Most digital meters read their own internal fusesresistance, hence 0.5 Ohms and not 0.00 Ohms. LCD readout of 'O.L.' Indicates no continuity through the fuse. The fuse is bad and needs to bereplaced. Thank you in advance sincerely.

God bless you. If you need further assistance, please contact me. E.CUADRA MANAGUA, NICARAGUA. Sep 29, 2011 . Dear Sir: Thank you by you request, I will help you right now: How to measure FUSEAND CONTINUITY A digitalmultimeter is the ideal multimeter t use to check fuses.

You can test afuse using either a digital volt-ohmmeter or an analog volt-ohmmeter. D3100 Drivers Windows 10 on this page. Thedigital multimeter uses a LCD to indicate the condition of the fuse under testwhile an analog meter uses a traditional meter movement to indicate the fusecondition. Difficulty: Easy Instructions Things You'll Need • Digital multimeter or analog multimeter 1. Usinga digital multimeter o 1 Connectthe test leads to the volt-ohmmeter. Plug the black test leads into the blackjack marked 'Com' or 'Common' on the front of the meter.Plug the red test lead into the red jack marked 'Volts/Ohms' on thefront of the meter.