• Tabletop/Under-Cabinet Color Touch Panel INSTALLATION MANUAL. • ELAN Z•System. Back Page Page ii © ELAN Home Systems 2005 • All rights reserved. • VIA!Valet6.4 is the right choice. With IR control, RS-232 control, and full-motion video dis- play, it has all of the features that make ELAN’s award-winning VIA!6.4 Touch Panel the most successful product in its category. • This feature helps protect the polyester plastic film display from environmental damage such as grease splatter. Stow Display Stow Display Position Face Position Face Display Face Display Face Page 2 © ELAN Home Systems 2005 • All rights reserved.

60º Up 35º Down, 45º Left/Right from Center Power... 16VDC, 1.0A Dimensions..7-1/2”(W) x 8-1/2”(H) x 8”(D) 190.5 mm (W) x 216.0 mm (H) x 203.2 mm (D) © ELAN Home Systems 2005 • All rights reserved. • • Avoid applying any foreign objects, such as adhesive labels, glue, etc. On the touch screen’s polyester film. This can release chemicals that can discolor the clear film.

Page 4 © ELAN Home Systems 2005 • All rights reserved. If the LCD display is over-heated or its temperature reduced below its recommended minimum, the liquid crystal polymer can be damaged and the display image may not recover. © ELAN Home Systems 2005 • All rights reserved. • The VIA!Valet6.4 can be used for any stand-alone (non-ELAN) system application or as a Home Theater controller.

Duct Tape did you ever figure out how to view pronto hex via the elan learner? Know you can view the hex but what about learned commands via the elan via learner? Hi, I moved into a house with an installed Elan audio distribution system installed. There were no manuals or instructions, just one lonely FM tuner. E L A N H O M E S Y S T E M S SC-4 PROGRAMMNG MANUAL VIA! SC-4 PROGRAMMING MANUAL. Panel to VIA!Learner and go to. 4 PROGRAMMNG MANUAL © ELAN Home.

The diagram below shows a basic application using one VIA!Valet6.4, a PVIA1 Valet Wall Plate and an ELAN IRD4 Amplified IR Connection Block to control a stack of A/V equipment. • System Design & Applications (cont’d) Applications (cont’d) Stand-Alone/Home Theater-Expanded Stand-alone systems (without an ELAN multi-room controller) can be as simple as one VIA!Valet6.4 controlling one IR source, or as com- plex as multiple VIA!6.4s, VIA!4.0s, keypads, and IR sensors all con- trolling many IR sources.

• System Design & Applications (cont’d) Applications (cont’d) ELAN S12 ELAN’s PS12 Precision Panel for the System12 Multi-Room A/V Controller (S12) makes quick work out of configuring a VIA!Valet6.4 Touch Panel to control S12 zones. Shawn Mcdonald Gravity Mediafire. Unlike in-wall VIA!s, a PVIA1 Valet Wall Plate is necessary when using a VIA!Valet6.4 with an S12.

• SENSE INPUTS PWR1 SENSE +16VDC POWER VALET TO SC-4 VIDEO 16 VDC/ VIDEO PVIA1 Valet Required only if PWR4 connecting more than 4 VIA!s to the PVIA4 Wall Plate © ELAN Home Systems 2005 • All rights reserved. • ELAN Z•System Advanced features like Audio Detect and Spatial Enhancement can be accessed using a VIA! Heaven Shall Burn Split Program 2. Valet6.4 in an ELAN Z•System. The diagram below shows one VIA!Valet6.4, one PVIA1 Valet Wall Plate along with four VIA!6.4s using a PVIA4 Wall Plate and a PZ6 Precision Panel for Z•Systems. • System Design & Applications (cont’d) Applications (cont’d) ELAN HD System Use a PHD12 Precision Panel for an ELAN HD System in conjunction with a PVIA1 Valet Wall Plate when using VIA!Valet6.4 Touch Panel in an ELAN HD system.

The diagram below shows one VIA!Valet6.4 Touch Panel, a PVIA1 Valet Wall Plate and eight VIA!6.4 Touch Panels. • Valet ZONE LOCAL ZONE LOCAL ZONE LOCAL 9VDC PWR9 16VDC PWR1 ZONE LOCAL VIA!POWER ZONE LOCAL VALET VIA!SS1 16VDC / 10A VIDEO 16VDC / 4A VIA!NET PS12 RS-232 Devices Page 12 © ELAN Home Systems 2005 • All rights reserved. • PVIA1 Valet Wall Plate are to be installed. Make sure that provisions have been made for instal- lation of ELAN System Precision Panels at the head-end.

The table below shows the maximum wire run lengths when using the following cables to provide power to the VIA!Valet6.4. • (VIDEO OUT) is provided.

The Video Termination Jumper must be moved from the factory default to the OPEN (HiZ) position. VIEW FROM BOTTOM OF VIA!VALET6.4 VIDEO VIDEO OPEN (HiZ) Position Page 14 © ELAN Home Systems 2005 • All rights reserved. • The LOCAL port is not normally used with the VIA!Valet6.4. If not using the local connection ELAN recommends removing the unused Cat-5 cable by peeling it from the 3-cable pre-terminated bundle and discarding. © ELAN Home Systems 2005 • All rights reserved.

• CENTERMARK HOLES FOR MOUNTING VIA!Valet6.4 3. Using a 3/16” drill bit, create four holes in cabinet from the center marks made in Step 2. Page 16 © ELAN Home Systems 2005 • All rights reserved. #6-32 SCREW WASHER CABINET SHELF PROTRUDING SCREW MUST BE LESS THAN 1/2 INCH TO AVOID DAMAGE TO INSIDE OF THE VIA!VALET64. © ELAN Home Systems 2005 • All rights reserved. • # 6-32 SCREW WITH CUP WASHER (4) VIAValet6.4 Bottom 7.